The Level For Life™ Guarantee
We guarantee the structural integrity of a qualifying shelf for the lifetime of the original owner. If it is installed and used as required, it will not sag under its rated load. If it does, we'll replace the hardware or the shelf, whichever is needed. We'll ask you to send the original shelf back so we can inspect it, then we'll send the replacement.
Rethinking the bracket
For decades, floating shelves relied on steel rods that bend and sag over time. We knew there had to be a better way.
That is why we build on the Hovr® System. By replacing the 'rod' with a structural Aluminum French Cleat, we eliminated the physics of sagging. The bracket doesn't just hold the shelf; it interlocks with it, creating a unified bond with the wall that gets stronger as weight is applied. The warranty applies to all shelves 1.75"+ thick.
The Hard Specs
Up to 300 Lbs Capacity
When installed into studs, the system supports up to a massive 300 lbs load. It’s not just for decor; it’s for life.
Aircraft Grade Aluminium
Machined from 6063 T6 Aluminum Alloy. Lighter than steel, stronger than iron, and completely rust-proof.
Built to Stay Level
The male/female interlocking design keeps the shelf from tipping forward, so it stays level when installed as directed.
THE “LEVEL FOR LIFE” GUARANTEE
We guarantee the structural integrity of a qualifying shelf for the lifetime of the original owner. If it is installed and used as required, it will not sag under its rated load. If it does, we'll replace the hardware or the shelf, whichever is needed. We'll ask you to send the original shelf back so we can inspect it, then we'll send the replacement.
What Is Covered
We guarantee that a qualifying shelf will:
• Stay level under its rated load, meaning it will not sag. This is not a promise of a perfect 90-degree angle off the wall, since walls are rarely perfectly square.
• On 1.75" and thicker shelves, support up to 300 lbs of static load at 8" depth, when installed into wood studs or structural blocking.
• 1.5" thick shelves are not covered by Level for Life. They use the HOVR™ Slim bracket and are guaranteed at HOVR's 125 lb static load rating, when installed into studs.
• Ratings are based on Hovr's engineer-approved 300 lbs at 8" shelf depth. Deeper shelves move the load farther from the wall and lower the safe capacity — for shelves deeper than 8" carrying heavy loads, email us before you order and we'll confirm the right bracket and thickness.
• Not pull away from the wall or open a gap at the seam because the hardware failed.
The Terms & Conditions
• Installation: The guarantee is valid only when the shelf is installed according to our instructions, specifically requiring the bracket to be mounted into wood studs or structural blocking. Complete installation includes both the physical (provided set screws) and chemical fastening of the brackets together, by epoxy or another method.
• Load Limit: The guarantee covers static loads up to 300 lbs (at 8" depth), including the weight of the shelf itself.
• Scope: This warranty covers the structural integrity of the suspension system. (Natural wood movement, such as seasonal expansion and contraction, is a separate characteristic of solid timber). Warranty only applies to shelves 1.75"+ thick.
How to File a Claim
If you notice a sag or slant:
1. Take a photo of the shelf with a level on top and email it to info@themortiseandthehare.com.
2. We'll help you check the install first, since many issues start there.
3. If it's a covered failure, we'll replace the hardware or the shelf. If we replace the shelf, we'll ask you to return the original so we can inspect it.
Commission your build with confidence. We are built for the long haul.



