6” Magnetic Torpedo Level

We have solved the primary failure of floating design: the sag. Traditional rod-based shelves eventually yield to gravity, causing a slant that compromises both beauty and safety.

Our LEVEL FOR LIFE Guarantee is backed by the HOVR™ aluminum cleat system. This interlocking mechanism acts as a structural extension of your wall studs, distributing weight evenly across the entire shelf.

Capacity: Rated for up to 300 lbs (at 8” depth, 1.75" min. thickness).*

Stability: Once locked, the shelf cannot vibrate, slide, or tip.

Our Promise: We guarantee your shelf will remain level under its rated load, or we will replace the shelf at no cost to you.

*While the HOVR™ system is rated for a maximum of 300 lbs, we recommend a safety-first approach of 150 lbs per stud connection. See here for all terms and conditions.

We source only FAS-grade Hardwoods—the highest classification of lumber available. Unlike "engineered" wood or hollow box shelves found in big-box stores, our shelves are solid through and through.

• Longevity: Can be sanded and refinished decades from now.
• The Finish: Protected by a professional-grade Matte hard wax oil that is water-resistant and family-friendly.
• The Grain: Every piece is unique, featuring rich grain patterns & occasional occlusions. Due to natural variations in lumber, your shelf may differ from the images provided.

Custom-Milled For Your Space

• Thickness: 1.5" (Slim) | 1.75” (Standard) | up to 3" (Heavy) | Custom profiles available.
• Depth: 4” to 12” options to suit kitchens, nurseries, or living rooms.
• Live Edge Shelves: Shelves with live edges may vary in depth
  +/- 1" due to live edge.
• Installation: All hardware included. Requires attachment to wall studs for maximum weight capacity.
• Origin: Proudly handcrafted in New York, USA.
• Shelves over 2.25” thick will be built as solid wood torsion boxes for stability and weight considerations.

We have replaced the flawed logic of traditional rod-based brackets with linear support. The patented HOVR™ bracket is an interlocking aluminum cleat that runs three quarters of length of your shelf, distributing weight evenly across your wall studs for a "zero-gap" finish.

INCLUDED WITH EVERY ORDER:

• Interlocking HOVR™ Cleat: The invisible, architectural backbone of your shelf.
• Structural Fasteners: Professional-grade screws for a permanent, secure hold.
• Precision Drill Bit: The exact gauge required for your bracket—no guesswork.
• Safety Set Screws: An integrated locking mechanism for total stability.
• Robertson Drill Bit: So you don't have to go digging around, even though you know you have one somewhere.
• Printed Instructions: Because paper is still the best.

Whether you are a seasoned DIY enthusiast or coordinating with a professional contractor, our installation process is designed for a flawless result. Our comprehensive guide provides step-by-step instructions, tool requirements, and professional tips to ensure your shelving is perfectly level and structurally sound.

View the Professional Installation Guide

Note: For the most secure "Zero-Deflection" result, we recommend anchoring the cleat into at least two wall studs. The HOVR™ system is designed to provide a seamless, flush fit against your backsplash or drywall.

Because every shelf is milled and finished specifically for your order, we maintain a 2–3 week production lead time. This ensures your piece receives the individual attention to detail that mass-produced shelving lacks.