Mahogany floating shelf with gallery rail in a bathroom
Solid Mahogany Floating Shelf with Gallery Rail
or 4 payments of $23.25 with
SOLID MAHOGANY | "LEVEL FOR LIFE" GUARANTEE
Handcrafted to Order in NY (Ships in 3-4 Weeks)
Level for Life™ Guaranteed
Every Shelf Plants a Tree
White-Glove Shipping (100% Insured)
Included In Box:
- ✓ 1x Solid Hardwood Shelf (Precision Mortised w/ Bracket Installed)
- ✓ 1x Heavy-Duty HOVR™ Bracket
- ✓ 1x Gallery Rail
- ✓ 1x Complete Hardware Kit
- ✓ 1x Installation Guide
- ✓ 1x Sincere Thanks
THE "LEVEL FOR LIFE GUARANTEE"
We have solved the primary failure of floating design: the sag. Traditional rod-based shelves eventually yield to gravity, causing a slant that compromises both beauty and safety.
Our LEVEL FOR LIFE Guarantee is backed by the HOVR™ aluminum cleat system. This interlocking mechanism acts as a structural extension of your wall studs, distributing weight evenly across the entire shelf.
Capacity: Rated for up to 300 lbs (at 8” depth, 1.75" min. thickness). 1.5" thick shelves are not covered by Level for Life; they use the HOVR™ Slim bracket and are guaranteed at HOVR's 125 lb static load rating, when installed into studs.*
Stability: Once locked, the shelf cannot vibrate, slide, or tip.
Our Promise: We guarantee your shelf will remain level under its rated load, or we will replace the shelf at no cost to you.
*While the HOVR™ system is rated for a maximum of 300 lbs, we recommend a safety-first approach of 150 lbs per stud connection. See here for all terms and conditions.
MATERIALS & CRAFT
We source only FAS-grade Hardwoods—the highest classification of lumber available. Unlike "engineered" wood or hollow box shelves found in big-box stores, our shelves are solid through and through.
- Longevity: Can be sanded and refinished decades from now.
- The Finish: Protected by a professional-grade Matte hard wax oil that is water-resistant and family-friendly.
- The Grain: Every piece is unique, featuring rich grain patterns & occasional occlusions. Due to natural variations in lumber, your shelf may differ from the images provided, and cracks and voids in the material may be filled with epoxy for appearance and stability. Shelves over 4" in depth may be constructed of 2 or more pieces glued along the edge grain.
GALLERY RAILS
We offer three gallery rail finishes, and all rails are shipped assembled and fit to your shelf exaclty.
Unlacquered Brass:
Arrives bright gold but is designed to age. Over time, it will oxidize to develop a warm, unique antique bronze patina.
Black Steel:
A smooth, matte architectural black, that creates a sharp, modern silhouette against the walnut grain.
Polished Nickel:
This is a warm, high-shine silver tone (warmer than Chrome). It maintains its mirror-like luster and does not patina or darken.
Specifications:
Our rails are 3/8" OD tubing: Unlacquered Brass is solid brass that develops a natural patina; Polished Nickel is brass with a polished nickel finish; Black is steel. Our posts are 1 7/8" in height & the rail sits at approx 1 3/4" above the shelf.
Spacing:
Our standard spacing ensures the rail is supported every 24 inches or less. Post spacing lands in the 24–30" range depending on your custom size.
- Shelves up to 24": 2 End Posts
- Shelves 25" – 48": 3 Posts (2 End Posts + 1 Center Connector Post)
- Shelves 49" – 72": 4 Posts (2 End Posts + 2 Center Connector Posts)
- Placement: For any shelf requiring more than two posts, all hardware is spaced equidistantly across the total length of the shelf for a perfectly balanced, custom look.
Polished Nickel Exception
Due to current manufacturing limitations from our hardware supplier, center connector posts (pass-through ball heads) are unavailable in the Polished Nickel finish.
- Maximum Length: 36"
- Post Count: 2 End Posts only
- Note: We cannot currently offer Polished Nickel rails for shelves exceeding 36" as they cannot be structurally supported by center posts
DIMENSIONS & SPECIFICATIONS
Custom-Milled For Your Space
- Thickness: 1.5" (Slim) | 1.75” (Standard) | up to 3" (Heavy) | Custom profiles available.
- Depth: 4” to 12” options to suit kitchens, nurseries, or living rooms.
- Live Edge Shelves: Shelves with live edges may vary in depth
+/- 1" due to live edge. - Installation: All hardware included. Requires attachment to wall studs for maximum weight capacity.
- Origin: Proudly handcrafted in New York, USA.
- Shelves over 2.25” thick will be built as solid wood torsion boxes for stability and weight considerations.
Sizing Tips
- 8” W × 4” D × 1.5”: Compact accent ledge for picture frames, spices, or small decor.
- 24” W × 8” D × 1.75”: Our most versatile size for books, dishes, and everyday kitchen or living-room use.
- Custom depth (4”–12”): Measure the deepest item you plan to display and add about 1”. Choose 10”–12” for dinner plates or larger books.
- Thickness: Slim (1.5”) for a light look and lighter loads; Standard (1.75”) for full rated capacity; Heavy for long spans or a bolder profile.
- Length: Plan your length around stud locations (typically 16” on center) so the HOVR™ cleat can anchor into at least two studs.
INSTALLATION
We have replaced the flawed logic of traditional rod-based brackets with linear support. The patented HOVR™ bracket is an interlocking aluminum cleat that runs three quarters of length of your shelf, distributing weight evenly across your wall studs for a "zero-gap" finish.
INCLUDED WITH EVERY ORDER:
- Interlocking HOVR™ Cleat: The invisible, architectural backbone of your shelf.
- Structural Fasteners: Professional-grade screws for a permanent, secure hold.
- Gallery Rail with Posts: Pre cut and assembled to fit your shelf exactly, the gallery rail ships detached from the shelf and must be inserted upon installation.
- Precision Drill Bit: The exact gauge required for your bracket—no guesswork.
- Safety Set Screws: An integrated locking mechanism for total stability.
- Robertson Drill Bit: So you don't have to go digging around, even though you know you have one somewhere.
- Printed Instructions: Because paper is still the best.
Whether you are a seasoned DIY enthusiast or coordinating with a professional contractor, our installation process is designed for a flawless result. Our comprehensive guide provides step-by-step instructions, tool requirements, and professional tips to ensure your shelving is perfectly level and structurally sound.
View the Professional Installation Guide
Level for Life coverage requires epoxy. Hovr's guide lists epoxy as optional for a basic install, but our Level for Life™ guarantee is only valid when the brackets are fastened with both the provided set screws and a chemical fastener (epoxy) into wood studs or structural blocking.
Note: For the most secure, level result, we recommend anchoring the cleat into at least two wall studs. Locate your studs before ordering, as they will guide your shelf length and placement. The HOVR™ system is designed to provide a seamless, flush fit against your backsplash or drywall.
SHIPPING & LEAD TIME
Because every shelf is milled and finished specifically for your order, we maintain a 3 - 4 week production lead time. This ensures your piece receives the individual attention to detail that mass-produced shelving lacks.
Free US shipping on orders $300+. Orders under $300 ship for a flat rate of $25. Every shelf ships white-glove and 100% insured.
Solid Mahogany Floating Shelf with Gallery Rail
BUILT DIFFERENT...
by Craftspeople who hope you love your shelves as much as they love making them.
Rooted in Reciprocity
True luxury is a cycle, not a straight line. We source our timber exclusively from sustainable North American yields, and through our partnership with One Tree Planted, we commit to planting a native hardwood tree for every shelf purchased. It is our way of ensuring the forest remains as permanent as the product we build.
FAQs
Please read our FAQs page to find out more.
What gallery rail finishes do you offer?
Unlacquered brass (ages to a patina), black steel, and polished nickel. Polished nickel is supplier-limited: max 36" shelf length, end posts only (no center connector posts in nickel right now). Support posts are spaced about 24–30" apart depending on your custom size so the rail stays rigid.
What’s the difference between a shelf with a gallery rail and the DIY kit?
A gallery-rail floating shelf is the complete made-to-order hardwood shelf with a size-matched rail. The Unlacquered Brass Gallery Rail DIY Kit is rail-only hardware for a shelf you already have. Browse complete builds in Gallery Rail Shelving.
What is a gallery rail floating shelf?
A solid hardwood floating shelf with a metal rail along the front (and optional side returns) so bottles, books, and display pieces don’t tip forward. Ours use hidden HOVR brackets. The rail is a front ledge on the shelf, not a wall-track system.
What is the actual weight capacity of these shelves?
When anchored into wall studs with the included HOVR™ cleat, shelves 1.75" and thicker are rated up to 300 lbs at 8" depth under our Level for Life™ guarantee. 1.5" Slim shelves are rated at 125 lbs. Always follow the install guide and hit studs for the rated load.
How do you guarantee the shelf won't sag over time?
Traditional rod-based brackets create a single point of failure that eventually bows. Our "No-Sag Guarantee" is possible because our system uses linear support. The interlocking aluminum cleat runs three quarters of the length of the shelf, effectively making the hardwood an extension of your wall’s internal structure.
Is the finish safe for moisture-rich kitchens and bathrooms?
Yes. Every board is sealed with a professional-grade, water-resistant Matte hard wax oil. This finish protects against steam, splashes, and stains while maintaining the organic, tactile feel of the solid American Walnut or White Oak. Unlike veneers, our solid hardwood will never peel or delaminate in humid environments.
Why is there a 3–4 week lead time?
We build every shelf to order in our Long Island shop. Typical production is 3–4 weeks so we can mill and finish solid hardwood to your size. Standalone gallery rail hardware kits usually ship in about 1–2 weeks.
Can I install these myself, or do I need a contractor?
The HOVR™ system is designed for a streamlined DIY installation. We include a "White-Glove" hardware suite (cleat, structural screws, and precision drill bit) to remove the guesswork. If you can use a level and a power drill, you can achieve a professional-grade, "zero-gap" result.
What is the difference between your solid wood and "real wood" veneers?
Veneer is a paper-thin slice of wood glued over compressed sawdust (MDF). Our shelves are 100% solid, furniture-grade hardwood. Solid wood possesses a natural warmth, weight, and "tactile soul" that veneers cannot replicate. Furthermore, solid wood is an investment—it can be sanded and refinished 50 years from now.